Triumph Rocket 3 GT 2021 - Page 1182

1144
Front Wheel – Removal
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
Do not allow the brake caliper to hang on the brake hose as this may damage the
hose.
Damaged hoses could cause brake failure leading to loss of motorcycle control and an
accident.
NOTICE
It is not necessary to disconnect the brake hoses.
1. Raise and support the front of the motorcycle to allow removal of the front wheel.
2. Detach and support the front brake calipers (see Front Brake Pads - Removal).
3. Loosen the pinch bolts at the lower end of the right hand fork.