Triumph Rocket 3 GT 2021 - Page 1188

1150
2. Support the wheel and tighten the nut (3) drawing in the bearing until it is fully
located against the inner face of the wheel.
1. T3880075 - Bearing Installer
2. T3880053 - Wheel Bearing Extraction Kit
3. Nut and washer
4. Wheel
NOTICE
Check that the spacer is centrally positioned against the inner wheel bearing race.
3. Support the previously installed wheel and bearing using service tool T3880053 and
fit the spacer.
1. Spacer
2. T3880053 – Wheel Bearing Extraction Kit