Triumph Rocket 3 GT 2021 - Page 1189

1151
Do not allow the spacer to become misaligned.
A misaligned spacer may cause the wheel bearings inner and outer races to be
misaligned during installation.
Premature wear and irreparable damage to components may be caused by incorrectly
installed wheel bearings.
4. Support the previously installed wheel bearing using service tool T3880053 and using
service tool T3880070, tighten the nut to draw the remaining wheel bearing into the
wheel until it is fully seated.
1. Nut and washer
2. T3880070 - Bearing Installer
3. T3880053 - Wheel Bearing Extraction Kit
4. Wheel bearing