Triumph Rocket 3 GT 2021 - Page 1196

1158
NOTICE
If fitting the original tyre pressure sensors, make sure they are fitted to the correct
wheel using the serial number on the sensor as noted for removal.
If fitting new tyre pressure sensors, record the serial numbers of the front and rear tyre
pressure sensors in the spaces provided on the relevant page of the Owner's
Handbook.
NOTICE
The method for the installation of the tyre pressure sensor is the same for the front
and rear wheels.
1. Make sure the mounting hole on the wheel rim and the area around it is free from
any dirt or grease.
2. Make sure a new seal is fitted to the tyre valve.
1. Tyre valve
2. Seal