Triumph Rocket 3 GT 2021 - Page 1255

1217
Mirrors – Removal
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
1. Remove the handlebar end weight. Discard the fixing.
2. Remove the spacer from the handlebar end weight.
NOTICE
Note the orientation of the mirror and its friction ring for installation.
3. Loosen the mirror pinch bolt and remove the mirror.
1. Fixing
2. Finisher cap
3. Bar end finisher
4. Spacer
5. Friction ring
6. Pinch bolt
7. Mirror