Triumph Rocket 3 GT 2021 - Page 1388

1348
Headlight/Position Light LED Unit Installation
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
1. If removed, Fit the headlight bowl and tighten the new fixings to 5 Nm.
1. Fixings
2. Headlight bowl
2. Fit the headlight bezel then the tension ring to the headlight LED as noted for
removal.
1. Tension ring
2. Headlight bezel
3. Headlight LED