Triumph Rocket 3 GT 2021 - Page 1413

1373
Rear Direction Indicators – Installation
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
1. Route the indicator harness as noted for removal.
2. Fit the direction indicator and the indicator bracket as noted for removal. Tighten the
new fixing to 3 Nm.
1. Fixing
2. Indicator bracket
3. Direction indicator
NOTICE
The harness for the right hand direction indicator can be identified by the red tape on
it.