Triumph Rocket 3 GT 2021 - Page 1420

1380
Licence Plate Light – Installation
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
1. Route the licence plate light harness as noted for removal.
2. Fit the licence plate light, flanged sleeve and tighten the fixing to 1.5 Nm.
1. Fixing
2. Flanged sleeve
3. Upper cover
NOTICE
The harness for the right hand direction indicator can be identified by the red tape on
it.