Triumph Rocket 3 GT 2021 - Page 1426

1386
Instruments – Installation
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
NOTICE
Make sure the three rubber grommets are fitted to the mounting plate as noted
during removal.
1. Fit the instruments its mounting plate, make sure the locating lugs are correctly
inserted into the grommets and fit the wire guide as noted for removal.
2. Secure with the fixings and washers and tighten to 3 Nm.
1. Fixings
2. Washers
3. Wire guide
4. Grommets
5. Mounting plate
6. Instruments