Triumph Rocket 3 GT 2021 - Page 1455

1415
2. If required, remove the heat shield.
1. Fixing
2. Regulator/rectifier
3. Connectors
4. Heat shield
Alternator Regulator/Rectifier – Installation
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
1. If removed, fit the heat shield as noted for removal.
2. Reconnect the two electrical connectors to the regulator/rectifier as noted for
removal.