1479
Instruments
Odometer Reset
This model is equipped with an odometer that allows the recorded odometer value to be
reset to zero during the PDI check.
In the event of replacement this functionality will also allow a new set of instruments to
be programmed with the motorcycle's existing odometer value.
Motorcycles with the odometer reset functionality enabled will display the Set/Reset
Odometer option in the chassis diagnostics menu.
If the odometer has recorded more than 120 miles (200 km) or previously been reset
the option will not be available and the buttons will be greyed out.
Triumph Motorcycles LTD. would like to emphasise the importance of following the
correct process whilst using the Triumph Diagnostic Tool to SET/RESET the odometer.
This operation can only be performed once and cannot be undone.
Check the new value is correct before proceeding.
When setting or resetting the odometer value ensure:
• The CORRECT odometer value is displayed in the Set Odometer box before
pressing the Set or Reset button.
• DO NOT press the Set or Reset buttons before entering the correct odometer
value. Once pressed the option to set or reset the odometer will no longer be
available.
• REMEMBER, pressing the set or reset buttons will lock the odometer and no
further programming will be allowed.
To Next Page
Loading...
