1492
Immobiliser System
Keyless Ignition Keys
The keyless ignition system allows the motorcycle to be started without the use of a
mechanical key. There are three keys supplied with the motorcycle. One smart key and
two passive keys.
To turn the motorcycle on, ensure a key is positioned in range of the LF antenna as
described below and press either the Power button or Engine Start button on the Engine
Start/Stop switch.
All keys supplied are locked to the keyless ECM. They cannot be used with any other
motorcycle or keyless ECM.
If all keys are lost, misplaced or damaged, then the keyless ECM will need to be
replaced.
To avoid unnecessary cost and time, make sure that all spare keys are kept in a secure
location.
An additional smart key can be purchased from your Triumph dealer. However, only
three keys can be programmed to the motorcycle. This can be a combination of smart
keys and standard keys.
Smart Key Operation
Smart Key
To Next Page
Loading...
