Triumph Rocket 3 GT 2021 - Page 1547

1507
1. Ensure the transmission is in neutral.
2. Start the engine.
NOTICE
For successful and accurate adaption, The engine must be at normal idle speed and
the gear change pedal must be in its normal rested position.
During adaption, do not raise the engine speed and do not touch or move the gear
change pedal.
3. The neutral position will adapt shortly after engine start provided the above
conditions are met.
4. The adaption status can be confirmed by selecting GEAR POSITION ADAPTION
STATUS on the Triumph diagnostic tool.
5. Turn the ignition OFF for at least 60 seconds to allow the adaption settings to be
stored in ECM memory.