Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
Do not remove the expansion tank or coolant pressure cap when the engine is hot.
When the engine is hot, the coolant inside the cooling system will be hot and may also
be under pressure. Contact with hot coolant will cause scalds and skin damage.
1. Allow the engine to cool for a minimum of 30 minutes.
2. Drain the coolant (see Coolant Replacement - Drainage).
3. Refill the coolant with Triumph HD4X Hybrid OAT coolant (see Coolant
Replacement - Filling).
Clutch Fluid Level Inspection
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
In accordance with the scheduled maintenance chart, inspect the clutch fluid level in the
master cylinder reservoir.
To Next Page
Loading...
