Triumph Rocket 3 GT 2021 - Page 188

160
21. Insert service tool T3880501 through the hole in the crankcase .Make sure the gear
tooth on the service tool fits between the two teeth with the alignment marks.
1. T3880501 Crankshaft Locking Pin
2. Alignment mark
NOTICE
With the camshaft alignment marks pointing inwards and the camshaft timing bar in
the slots of the camshaft, adjustment is not required. Continue from step 23.
If the camshaft timing bar will not fit into the camshaft slots, repeat the camshaft
timing adjustment procedure.