210
Instrument Panel
Standard required:
All instruments must operate correctly.
Check:
Check that the warning lights on the instruments operate correctly.
Steering and Suspension
Standard required:
The motorcycle should be easy to steer and should not pull to one side.
Cornering should be precise with the motorcycle leaning naturally into the corner and
returning to the upright position upon exiting the corner.
The front and rear suspension operation should be smooth with no excessive stiffness,
roughness or tight spots.
Check:
Check the correct action of the front suspension, including the damper action.
Check the correct action of the rear suspension, including the damper action.
Cruise Control (if fitted)
Standard required:
All cruise control switches must operate correctly. All functions and displays must
operate as described in the Owner's Handbook.
Check:
Once the relevant conditions have been met as described in the Owner's Handbook, turn
the cruise control ON and OFF.
To Next Page
Loading...
