Triumph Rocket 3 GT 2021 - Page 288

260
7. Release the fixings and remove the rear brake line front bracket.
1. Fixings
2. Brake line front bracket
3. Brake line
Do not allow a brake component to hang unsupported on the brake hose or line.
Brake hoses or lines that are not supported may become damaged or bent.
Bent or damaged brake hoses or lines lead to reduced braking efficiency causing loss
of motorcycle control and an accident.
Note the position of the rider's right hand control plate for installation.
Always return the rider control plates to their original positions. Operating the
motorcycle with the control plates in a position which is unfamiliar may lead to loss of
control or an accident.