14
Safety Instructions
Diagnostic Trouble Codes
If the motorcycle falls over or is involved in an accident, diagnostic trouble codes may
be triggered and stored.
If the motorcycle has fallen over or been involved in an accident, always clear any
diagnostic trouble codes.
If diagnostic codes reappear, address them immediately.
Always ensure that any lifting apparatus has adequate load and safety capacity for the
weight to be lifted. Ensure the motorcycle is well supported to prevent any possibility
of the machine falling prior to lifting or jacking or while repairs and servicing are
carried out.
Never rely on a single means of support when working with the motorcycle. Use
additional safety supports and straps to prevent toppling.
Do not leave tools, lifting equipment, spilled oil, etc. in a place where they could
become a hazard to health. Always work in a clean, tidy area and put all tools away
when the work is finished.
Precautions Against Damage
Avoid spilling brake fluid or battery acid on any part of the bodywork. Wash spillages off
with water immediately.
Disconnect the battery earth lead before starting work, see ELECTRICAL PRECAUTIONS.
Always use the recommended service tool where specified.
Protect exposed bearing and sealing surfaces, and screw threads from damage.
To Next Page
Loading...
