Exhaust fumes are poisonous, always operate a motorcycle in the open-air or in an
area with adequate ventilation.
Do not operate a motorcycle in an enclosed area without adequate ventilation.
Operating a motorcycle in an enclosed area without adequate ventilation can cause
loss of consciousness and death within a short period of time.
1. Navigate to ENGINE DIAGNOSTICS - Function Test - Adapt the crankshaft position.
2. Click Start.
3. Follow the on-screen instructions.
The function test will check that the transmission is in neutral and that the neutral
position is adapted. If these conditions are not met, the test will be aborted and you
will be prompted to check the transmission and neutral adaption status.
If the transmission conditions are correct, you will be prompted to start the engine and
bring the engine up to the required temperature.
Once the engine has reached the required temperature the test will progress
automatically and you will be prompted to hold the throttle (twist grip) fully open.
The test will be aborted if the throttle is not opened within 60 seconds.
It is important that the throttle is held fully open during this stage of the test. The
diagnostic tool will display a red light if the throttle is not in the correct position. The
light will change to green when the throttle is held fully open.
4. Hold the throttle fully open within 60 seconds of being prompted by the diagnostic
tool. Do not close the throttle until instructed to do so by the diagnostic tool.