Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
1. Connect the third grey connector (see Electrical Connectors) as noted for removal
and manoeuvre the engine ECU into position to connect the two black connectors.
2. Connect the two black electrical connectors as noted for removal and manoeuvre the
engine ECU to its location in the battery box.
1. Connector B (33 pin connector)
2. Connector A (39 pin connector)
3. Connector C (33 pin connector Grey)
4. Engine ECM
To Next Page
Loading...
