Triumph Rocket 3 GT 2021 - Page 856

818
4. Release the fixing, disconnect the electrical connector and remove the temperature
sensor and hose assembly.
1. Fixing
2. Electrical connector
3. Hose
4. Temperature sensor
5. If required, remove the hose from the temperature sensor.
Ambient Air Temperature Sensor – Installation
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
1. If removed, fit the hose to the temperature sensor as noted for removal.