Triumph Rocket 3 GT 2021 - Page 863

825
Keyless ECM – Removal
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
Perform the following operations:
• Seat - Removal
• Battery - Removal
• Fuel Tank - Removal
NOTICE
Note the positions of the relays and starter motor solenoid for installation.
1. Remove the relay cover.
2. Release the push release plastic rivet and detach the starter motor solenoid bracket
from the relay bracket.
1. Relay cover
2. Starter motor solenoid bracket
3. Push release plastic rivet