Triumph Rocket 3 GT 2021 - Page 912

874
Coolant Expansion Tank – Installation
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
1. Make sure the grommets for the expansion tank lower locating lugs are fitted to the
lower cowl assembly.
1. Grommets
2. Lower cowl assembly
2. Fit the coolant expansion tank to the lower cowl assembly. Make sure the lower
locating lugs fit into their grommets on the lower cowl assembly. Tighten the fixings
to 4 Nm.