897
5. Slide the cleaning hook carefully under the seal lip. Rotate service tool T3880216 360°
in the direction shown then remove the cleaning hook from the oil seal.
Direction of Rotation
6. Slide service tool T3880216 down to use the other cleaning hook to clean the dust
seal. Rotate service tool T3880216 360° in the direction shown then remove the
cleaning hook from the dust seal.
Direction of Rotation
1. Dust seal
2. Cleaning hook
7. Use the wider end of service tool T3880183, with hand pressure only, to press the
dust seal into position in the outer tube.
To Next Page
Loading...
