898
Front Forks – Removal
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
Do not allow a brake component to hang unsupported on the brake hose or line.
Brake hoses or lines that are not supported may become damaged or bent.
Bent or damaged brake hoses or lines lead to reduced braking efficiency causing loss
of motorcycle control and an accident.
Perform the following operations:
• Front Wheel - Removal
• Front Mudguard - Removal
Note the routing of the ABS wheel speed sensor harness and its locating clips for
installation.
There is a shim between the ABS wheel speed sensor and the front fork leg.
To Next Page
Loading...
