Need help?Do you have a question about the Triumph SPEED TWIN 1955 and is the answer not in the manual?
General| Engine Type | Parallel Twin |
|---|---|
| Displacement | 649 cc |
| Transmission | 4-speed |
| Top Speed | 160 km/h |
| Compression Ratio | 8.5:1 |
| Carburetion | Amal Monobloc |
| Front Suspension | Telescopic forks |
| Rear Suspension | Swingarm with twin shock absorbers |
| Front Brake | Drum |
| Rear Brake | Drum |
| Engine | Air-cooled |
| Frame | Steel tubular |
Core engine performance and timing specifications for the Tiger 110 (T110) model.
Detailed explanation of the motorcycle's dry sump oiling system and its components.
Detailed instructions for adjusting valve tappets on various Triumph models.
Detailed guide for inspecting and identifying crankshaft and connecting rod components.
Instructions for assembling connecting rods, ensuring correct tension and lubrication.
Detailed guide for timing the engine, including valve and ignition timing procedures.
Specific steps for setting the inlet camshaft timing and verifying accuracy.
Method for precise ignition timing using a degree disc, suitable for performance tuning.
Guide for setting magneto timing, including magneto wheel, contact breaker, and piston positioning.
Procedures for ignition system components when using coil ignition.
Steps for correctly positioning the distributor and setting contact breaker points.
Final checks and connections for coil ignition timing.
Comprehensive guide to disassembling the gearbox.
Detailed guide for reassembling the gearbox internal components.
Explanation of the clutch mechanism, its operation, and critical maintenance points.
Procedures for disassembling the clutch assembly.
Specific steps for removing clutch slotted nuts and associated springs.
Further steps in clutch dismantling, including plate removal and mainshaft nut.
Procedure for removing the mainshaft nut securing the clutch assembly.
Steps for removing the clutch housing and related drivetrain components.
Detailed guide for reassembling the clutch assembly.
Comprehensive guide to telescopic fork maintenance, including oil changes and general upkeep.
Steps for checking and adjusting steering head bearing play for safe steering.
Steps for disassembling the telescopic fork, including top lug, middle lug pinch bolts, and oil drain.
Guide on how to correctly align the front fork assembly.
Instructions for adjusting brake mechanisms for optimal stopping power.
Detailed guide for disassembling the rear wheel assembly.
Detailed procedure for disassembling the spring wheel's brake anchor plate.
Specific instructions for disassembling the plunger guide box and brake cam.
Detailed guide for Amal carburetter operation, maintenance, and troubleshooting.
Explanation of the Amal Monobloc carburetter's working principles and adjustments.
Instructions for adjusting and tuning the S.U. carburetter for optimal engine running.
Explanation of the dynamo's charging system and its components.
Maintenance procedures for the magneto ignition system.
Guide for setting the magneto contact breaker points and ensuring clean operation.
Procedure for setting contact breaker points and replacing ignition cables.
Diagnostic steps for ignition system failures causing no spark.
Detailed explanation of the Amal Monobloc carburetter's working principles and adjustments.
Detailed procedure for assembling the crankshaft for the 3T model.
Step-by-step guide for disassembling the early type of Spring Wheel.
Procedures for reassembling the Spring Wheel Mk. 1.
Diagnostic steps for engine starting failures, including fuel and ignition checks.
Troubleshooting guide for engine stalling issues, focusing on fuel and ignition.
Diagnostic steps for engine misfiring, covering plugs, carburetters, and ignition timing.
Steps to diagnose and fix engine power loss issues.
Diagnostic steps for engine overheating problems.
To Next Page