Maintenance
163
• Lower the tool kit tray (if equipped)
into its original location. Reinstall
and tighten the tool kit tray
fastener.
• Place the diagnostic connector and
any other loose items securely in
the tool kit tray.
• Reinstall the rider's seat, see
page 86.
• Re-install the passenger seat, see
page 85.
Fuses
Warning
Always replace blown fuses with new
ones of the correct rating (as specified
on the fuse box cover).
Never replace a blown fuse with a fuse
of a different rating.
Use of an incorrect fuse could lead
to an electrical problem, resulting in
motorcycle damage, loss of motorcycle
control and an accident.
A blown fuse is indicated when all of
the systems protected by that fuse
become inoperative. When checking for
a blown fuse, use the relevant tables to
establish which fuse has blown.
If the motorcycle is equipped with
rider mode settings, then before
disconnecting the battery or removing
a fuse, note and record the rider mode
settings. Once the fuse has been
reinstalled or the battery reconnected
then the rider mode settings should be
reset as noted.
To Next Page
Loading...
Need help?
General
