(70)Lubricate clutch and brake pedal pivots.
Using
an
oil
can,
lubricate
1. Clutch pedal pivot.
2. Brake pedal pivot.
3.
Wipe
away surplus oil
to
prevent staining the carpet.
(71) Lubricate all locks, door hinges, strikers and
bonnet
release.
2
1--i'_~
MAINTENANCE
Using
an
oil
can,
lubricate
1.
Door locks.
2. Door hinges.
3. Door strikers.
4. Luggage compartment lock.
5. Bonnet release mechanism.
6.
Wipe
away surplus oil.
(72) Check/report condition and security
of
seats and seat
belts.
1.
Move
driver's seat back to its fullest extent.
2. Check security
of
front bolts holding seat runner
to
floor.
3.
Move
driver's seat forward to its fullest extent.
4. Check security
of
rear bolts holding seat runner
to
floor.
5.
With
seat in middle position, check security
of
seat in
runner.
6. Repeat the procedure in 1
to
5 for passenger seat.
7. Check seat tipping and lock mechanisms.
8. Check seat belts for wear and damage.
9. Check seat belt connections for wear and damage.
10. Check security
of
seat belt anchorage bolts, which
if
correct should be tightened
to
24 to 32
lbf
ft
(3·3
to
4·4
kgfm).
11. Report any defects found.
~.".L'·.'~"O
~
Triumph
TR6
Manual. Part
No.
545277 Issue 1
M12053
10.00.25
To Next Page
Loading...
