Triumph TR6 PI - Page 52

ENGINE OPERATIONS
Cam followers - set - remove and refit
Camshaft - remove and refit
Connecting rod bearing
- set
- remove and refit
- one - remove and refit
- extra each - remove and refit
Connecting rods and pistons
- remove and refit
- Overhaul
Crankcase front sealing block
Crankshaft
-- remove and refit
Crankshaft end-float - check and adjust
Crankshaft pulley - remove and refit
Crankshaft rear oil seal - remove and refit
Cylinder block drain plug - remove and refit
Cylinder block front mounting plate gasket
- remove and refit
Cylinder block - rebore
Cylinder head
- overhaul
- remove and refit
Cylinder head gasket - remove and refit
Cylinder head nuts - tighten
Cylinder pressures - check
Decarbonize, reface all valves and seats, grind-in valves,
tune engine
Distrubutor drive shaft
- carburetter model - remove and refit
Distributor drive shaft - p.r. model - remove and refit
Triumph TR6 Manual. Part No. 545277 Issue 1
ENGINE
12.29.57
12.13.01
12.17.16
12.17.17
12.17.18
12.17.01
12.17.10
12.25.11
12.21.33
12.21.26
12.21.01
12.21.20
12.25.07
12.25.10
12.25.23
12.29.18
12.29.10
12.29.01
12.29.27
12.25.01
12.29.21
12.10.22
12.10.22
Continued
12.1
' ...• "-
.--.