Triumph TR8 - Page 29

SEATS AND SAFETY HARNESS
Fig. 1
28
SEATS AND SAFETY HARNESS
Seat Adjustment (Fig 1)
Either front seat can be adjusted for leg reach while the
occupant IS seated by lifting a bar against spring pressure to
release the seat runner The seat can then be moved to the
desired poSI\lon before allowmg the bar to engage In liS
nearest locking notch Some additional seat movement may
be necessary 10 achieve this
The angle of the seal back-rest can be altered to prOVide a
reclining POSition To achieve this. raise and hold the lever (1)
and. uSing controlled body pressure. move the back-rest to
the deSIred pOSI!lon Release the lever to lod: the back-rest at
the chosen angle The seat back. If unrestramed. Will relurn \0
the upright POSition when the locking lever IS raIsed
Head Restraints
The head restraints should be ad/us(ed to suppor! Ihe back of
(he head and not (he neck ThiS can be achieved by hllln9 or
lowering the deVice as reqUIred