Self Monitoring Blood Glucose System
Before You Test
✔ Contact your Doctor or Healthcare
Professional to determine how often you
should test and what your target ranges
are for blood glucose results.
✔ ALWAYS read the Owner’s Booklet
before testing for the first time and
before using this Quick Reference Guide.
Blood Glucose Testing
1. FDA Public Health Notification: Use of Fingerstick Devices on More
than One Person Poses Risk for Transmitting Blood Borne Pathogens.
Retrieved June 21, 2012 from http://www.fda.gov/MedicalDevices/
Safety/AlertsandNotices/ucm224025.htm.
© 2018 Trividia Health, Inc. TRUE METRIX and Trividia Health logo are
trademarks of Trividia Health, Inc.
RE
A4TVH08 Rev. 41
Customer Consultation
English or Spanish, Monday - Friday,
8AM -8PM EST, 1-800-803-6025
www.trividiahealth.com
Manufactured by:
Step 6
Glucose result will
be displayed with
alternating date and
time.
Step 7
Hold meter in a vertical
position with strip
pointing down. Press
Strip Release Button to
discard the used strip
from the meter. Testing is
complete.
Step 1
Wash your hands with
warm, soapy water. Dry
thoroughly. Do not use
alcohol.
Step 4
Lance fingertip. Allow
blood drop to form.
Refer to lancing device
Instructions for Use for
detailed instructions.
Step 2
Gather your materials
and prepare your lancing
device. Remove test strip
from vial and close vial
immediately.
Step 3
Insert strip into Test Port
with black blocks facing
up. The meter turns on.
Step 5
Wait until Drop Symbol
appears in Display. With
strip still in meter, touch
Tip of strip to blood
drop. Allow blood to be
drawn into strip. Remove
test strip from blood
drop immediately
after meter beeps and
dashes appear across
Meter Display.
Step 2 Tips
Peel and discard the clear
protective sticker from
the Meter Display.
Remove one Test Strip from
vial. Then immediately press
down vial cap firmly to close.
See below for additional
storage conditions.
Step 3 Tips
X
DO NOT place
Test Strip
in backwards.
With meter off, insert Test
Strip into Test Port with
Contact End (black blocks)
facing up. The Meter turns
on.
Test
Port
Contact
End (black
blocks
facing up)
Sample
End (Tip)
✔
Step 5 Tips
X
DO NOT place blood
onto Test Strip
before inserting
Test Strip into
Meter Test Port.
With strip in
Meter, touch Tip
of strip to blood
drop.
✔
DO NOT place blood drop on
top of Test Strip or any other
location except the Sample End
(Tip) of the Test Strip.
X X
WARNING: Upon opening the test strip carton, examine the product for missing, damaged or
broken parts. Ensure the test strip vial cap is securely closed. If the product is damaged or the
vial cap is not closed, DO NOT use the test strips for testing; product may give inaccurate results.
Contact Trividia Health Customer Care at 1-800-803-6025 for replacement and assistance.
Additional InformationAfter You Test
✔ ALWAYS store the test strips in the original vial with the cap tightly closed.
✔ ALWAYS keep the cap of the test strip vial tightly closed.
✘ NEVER transfer test strips from one vial to another. Do not expose to heat, moisture, or humidity.
✘ NEVER compare your meter to other meters.
✘ NEVER immerse meter or test strips in liquids or place any liquids onto meter or into the Test Port.
✔ Store TRUE METRIX® AIR System in a dry place at room temperature (40°F-86°F) at 10%-80%
relative humidity. DO NOT FREEZE.
✔ Dispose of used test strips and lancets in accordance with local regulations.
• ALL parts of your blood glucose monitoring system could carry blood-borne pathogens after use, even after cleaning and
disinfecting.
1
• Cleaning and disinfecting the lancing device and the meter destroys most, but not necessarily all, blood-borne pathogens.
• Wash your hands thoroughly with soap and warm water before and after handling the meter, lancing device, lancets, or test strips
as contact with blood presents an infection risk.
• If the meter is being operated by a second person who provides testing assistance, the meter and lancing device should be
disinfected prior to use by the second person.
• It is important to keep the meter and the lancing device clean and disinfected. For instructions on how to clean and disinfect the
meter and lancing device, see Meter Cleaning and Disinfecting and Lancing Device Cleaning and Disinfecting in the Owner’s Booklet.
Meter and Test Strip
Battery
Compartment
Meter
Label
Back
Data
Contacts
Display
Strip
Release
Button
Test Port
Contact End
(black blocks
facing up)
Sample End
(Tip)
Front
Quick Reference
Guide
To Next Page
Need help?
General
