Trix 18 Series - Factory Set

9
CV Discription DCC Value
Factory-Set
DCC / SX1
SX1 Value
1
*
7-bit Adress 0 - 127 3 / 1 0 - 111
2 Minimum speed 0 - 15 2 / — —
3 Acceleration delay 0 - 255 3
2 1 - 7
4 Braking delay 0 - 255 3
5
*
**
Maximum speed 0 - 255 134 / 5 1 - 7
7 Version Number 10 60 / — —
8 Factory Reset / Manufacturer Recognition 8 131 / — —
17 Extended address (upper part) CV 29, bit 5 =1 255 / — —
18 Extended address (lower part) CV 29, bit 5 =1 255 / — —
29
bit 0: Travel direction polarity reversal
bit 1: number of speed levels 14 or 28/128
bit 2: DCC Operation with braking Block.
DCC-, Selectrix- and DC power Operation
bit 5: Adress size 7 bit / 14 bit
0 / 1
0 / 2
0 / 4
0 / 32
***
0, 1, 2, 3, 4, 5,
6, 7, 32, 34, 35,
36, 37, 38, 39
6 / — —
51 *
bit 0: Motor polarity reversal
bit 1: Headlight polarity reversal
bit 2: Track polarity reversal
0 / 1
0 / 2
0 / 4
***
0 - 7
0 4
— Stopping Block — — / 1 1 or 2
— Pulse width for motor control — — / 1 - 4
Important: Changes in the settings market with ( * ) for the Selectrix mode of operation automatically lead to changes in the DCC mode of
operation and versa!
** Higher values do not lead to a further increase in speed.
*** The values for the desired settings must be added.