OPERATING REQUIREMENTS
User Manual VanLink System featuring TouchStar™ Technology - Troll Systems Corporation
2-10 Document VLSG-01 - 10/21/08
2.7 OPERATING REQUIREMENTS
In order for VanLink to be effective there has to be GPS coverage and a clear microwave
path for ENG operations from where the vehicle is located.
For remote control of VanLink, the vehicle will also need to be in an area that has the
coverage from the customer’s particular cellular service provider.
2.7.1 Transmitter Control / Available Options
There are Control-PACs already written for most transmitters in use for ENG. Most
commonly used are MRC’s Strata, PTX-Pro, and CR2 along with Nucomm’s Channel
Master and NewsCasters series. Besides transmitter control, there are an almost infinite
number of possibilities for remote control of other components using the V750. For
example, it would be relatively easy to remotely control the vehicle’s door locks or
additional devices mounted in the vehicle’s racks. Some devices may require drivers to
be written for control, while others may require only simple contact closures. Feel free
to contact a Troll Systems representative to learn more about the many possible
solutions that VanLink can improve the your ENG operations needs.
To Next Page
Loading...