(5)Only original spare parts should be used with regard to repair.
(6)If the product is lend out to third party the assembly instructions have to follow.
Storage
(1) After maintenance, the sprayer should be put at a dry and ventilated spot – like above the
ground, away from fire, sunbeam and children.
(2) You must discharge and recharge the battery every three months.
(3) Environment of use: temperatures -5°C~40°C
Breakdown maintenance
1.connects lines cut
out
2.low power
3.broken switch
1.open the machine
bottom,open
batterycover,connect
lines.
2.charge the battery
3.change another good
switch
Abnormal sound in
the motor when
working
Screws of pump
becomes flexible
The in-let tube or the
out-let tube is flexible
or broken
1.the sheet in the
nozzle is jammed
2.jet hole is broken
3.filter is jammed
4.leakage in the
connecting
5.power low
6.dusty pump
1.fasten the sheet
2.change another jet
nozzle
3.clean the filter
4.fasten
5.charge the battery
6.wash the pump with
clean water
Technical data
1. Item: Art. 2031
2. Size: 32.5*19*45.5cm
3. Weight:3.85kg
4. Capacity: 8L
5. Working pressure: 4.0bar
6. Flow rate: 2.2L/Min
7. Item: Art. 2030
8. Size: 35.5*24*57.5cm
9. Weight: 5.46kg
10. Capacity: 16L
11. Working pressure:
5.5bar
12. Flow rate: 3.1L/Min
To Next Page
Loading...