TrolMaster Hydro-X - Page 19

19
5).System Reset:
Devices Reset: When using this function, the unit will delete all addresses assigned to the connected Device
Stations. User can reconnect Device Stations for resign addresses.
Factory Reset: This function will restore the unit to factory default settings.
Firmware Update: Update a new firmware to fix bugs or add new functions to the unit. Visit our website to
find out update version.
TrolMaster only uses high quality components Under normal. operating conditions, the mechanical and
electronic components are covered by athree-year warranty from the original date of purchase. For service,
return the HCS-1 Hydro-X Control Systemin the original packaging to your shop with the original salcs
receipt.
Components that are excluded from warranty are components that have failed due to abnormal usage.
In the case of defects of the HCS-1 Hydro-X Control System, the Controller will either be replaced or
repaired using new or reconditioned products or parts. Lf the Controller will be replaced this limited warranty
shall apply to the replacement product for the remaining initial warranty period, i.e. (three) 3 years from the
date of purchase of the original product.
GENERAL INFORMAFION
WARRANTY
All returns need to be done in the original packaging in order to avoid. Damages of the product during
transport. Defective products need to be returned to factory or service shop for repair. Non-professionals
DO NOT open the cabinet to prevent electric shock or damage to the equipment.
RETURNS
Pour tout retour, le produit doit être replacé dans son emballage d'origine afin d'éviter qu'il soit endommagé
pendant le transport. Les produits défectueux doivent être renvoyés à l'usine ou à l'atelier d'entretien pour
réparation. Avis aux non professionnels: n'ouvrez pas l'armoire afin d'éviter tout risque de choc électrique ou
de dommages matériels.
RETOURS