Tronic TLGL 1000 B1 User Manual

■ 6
│
GB
│
IE TLGL 1000 B1
DANGER
► Packaging material should not be used as a play thing. There is a risk of
suffocation!
Disposal of the packaging
The packaging protects the device from transport damage. The packaging
materials are selected from the point of view of their environmental friendliness
and disposal technology and are therefore recyclable.
The recirculation of packaging into the material circuit saves on raw material
and reduces the amount of waste generated. Dispose of packaging material
that is no longer needed as per the regionally established regulations.
NOTICE
► If possible preserve the device's original packaging during the warranty
period so that, in the event of a warranty claim, you can package the
device ideally for its return.
Operating components
Display
2
Operating status display (charging slots 1 to 4)
3
USB Output
4
Operating status display (Li-ion batteries)
5
Charging contact for Li-ion batteries
6
Holder for Li-ion batteries
7
Charging slots for types AAA/AA/C/D (charging slots 1 to 4)
Handling and operation
In this chapter you will receive important information for the handling and
operation of the device.
Switching the appliance on/off
♦ Place the appliance on a smooth, level and slip resistant surface.
♦ Compare the technical details with those of your power supplier. If they
match, connect the mains cable to an easily accessible mains power socket.
The LEDs light up red three times. The battery charger is now ready for use.
♦ To switch off the battery charger, unplug the appliance from the mains
socket.

Tronic TLGL 1000 B1 Specifications

General

Brand	Tronic
Model	TLGL 1000 B1
Category	Battery Charger
Language	English