Tronic TPB 10000 A1 Short Manual

TPB 10000 A1
■ 10
│
GB
│
IE
Charging the power bank
Before using the power bank, the integrated
battery must be fully charged.
CAUTION
► Charge the device only in dry interior
rooms.
► The power bank must never be charged
and used for charging an external device
at the same time.
► Due to the high power consumption, the
power bank must be charged using a USB
mains adapter. Do not charge the power
bank via the USB port of a PC or notebook.
► Use only a USB mains adapter with an
output voltage of at least 5 V and an output
current of at least 3A to charge the power
bank.
► Disconnect the charging cable when charg-
ing is complete!
♦ Connect the USB-A plug of the charging
cable6 to a suitable USB power supply
(not supplied).
♦ Connect the USB-C plug of the charging
cable 6 to the USB-C charging port 3 on
the power bank.

Tronic TPB 10000 A1 Specifications

General

Brand	Tronic
Model	TPB 10000 A1
Category	Accessories
Language	English