Tronsmart Apollo Bold User Manual

Power On/Off
The earbuds will automatically power on when taken out of the charging
case and will power off when placed back into the charging case.
Bluetooth Pairing with your Device
1. Take out two earbuds from the case.
2. The red and white light flash alternately.
3. Then select 'Tronsmart Apollo Bold ' from your device's Bluetooth list.
4. Tap the 'Pair' option when 'Bluetooth Pairing Request' popup comes.
5. Paired with the device successfully.
How to Reset if the Earbuds Malfunctions
1. Take two earbuds out of the case.
(Make sure that the two earbuds are not connected.)
2. Tap the touchpad of left and right earbud five times respectively, then
you can pair the left and right earbud.
(The light of earbuds flash red twice and white in sequence.)
3. The white light of left and right earbud flash slowly.
4. The left and right earbud are paired successfully.
ON OFF
White
Red
Bluetooth
MY DEVICES
Tronsmart Apollo Bold
Not Connected
03

Tronsmart Apollo Bold Specifications

General

Type	True Wireless Earbuds
Connectivity	Bluetooth 5.0
Active Noise Cancellation	Yes
Battery Life (With Charging Case)	Up to 30 hours
Charging Port	USB-C
Water Resistance	IP45
Driver	10mm Dynamic Driver
Frequency Response	20Hz - 20kHz
Audio Codecs	SBC, AAC
Chipset	Qualcomm QCC5124
Charging Time (Earbuds)	2 hours
Charging Time (Case)	2 hours
Battery Life (Earbuds)	Up to 10 hours