Tronsmart Apollo Bold User Manual

Clear the Phone's Pairing List
1.Take out two earbuds from the case and wait for Bluetooth pairing
mode.
2.When the red and white light of earbuds flash alternately, tap and hold
the touchpad on earbuds for 5 seconds until the red light flashes three
times.
3.Put two earbuds back in the case after the light of earbuds goes off.
4.The earphones can be re-connected to the phone by taping the
'Tronsmart Apollo Bold ' that displays in your pairing list.
Touch Control
Specifications
L/R
L/R
R
L
R
L
L/R
L/R
L/R
ANC ON / OFFAmbient sound mode
Play/Pause
Next track
Previous track
Volume +
Volume -
Answer/End a phone call
Reject a phone call
Activate voice assistant
Tap three times
Tap twice
Tap and hold the right earbud for 2 seconds
Tap and hold the left earbud for 2 seconds
Tap the right earbud
Tap the left earbud
Tap twice
Tap and hold for 2 seconds
Tap once and hold
Model
Bluetooth version
Chip
Audio codec
Bluetooth profile
Connection distance
Speaker driver
Impedance
Audio frequency range
Apollo Bold
5.0
Qualcomm® QCC5124
aptX, AAC, SBC
HFP/HSP/AVRCP/A2DP
Up to 15 meters / 50 feet
Φ10mm
32Ω±15%
20-20K Hz
04

Tronsmart Apollo Bold Specifications

General

Type	True Wireless Earbuds
Connectivity	Bluetooth 5.0
Active Noise Cancellation	Yes
Battery Life (With Charging Case)	Up to 30 hours
Charging Port	USB-C
Water Resistance	IP45
Driver	10mm Dynamic Driver
Frequency Response	20Hz - 20kHz
Audio Codecs	SBC, AAC
Chipset	Qualcomm QCC5124
Charging Time (Earbuds)	2 hours
Charging Time (Case)	2 hours
Battery Life (Earbuds)	Up to 10 hours