14
Skin Care After
Treatment
• Keep the device away from water and humidity.
• Be careful to prevent foreign substances from
entering the motor by keeping a black wool
lter in at all times.
• Clean the diamond tip with an ultrasonic
jewelry cleaner every few months.
• Replace the black wool lter after every
treatment.
• Be sure to unplug the power cord when the
MiniMD is not in use.
• Using a soft cleaning brush (like an old
toothbrush, nail brush, or small wire brush)
gently brush the head of the diamond tip after
each usage to remove dead skin cells and
debris.
To Next Page
Loading...