8
How To Use
Wash and dry your face before
starting each treatment.
STEP 1
Plug power adaptor into wall power
outlet. Check to see the LED light
has come on the power adaptor.
STEP 2
Press the power button again to
adjust the suction level to High.
We recommend starting with Low
Suction Level for at least the rst
few uses to allow your skin to get
accustomed to the treatment.
STEP 4
Press and HOLD the power button
“ ”. The device will turn on, and
the button/power level light will
light up. Your MiniMD is now on
the Low power setting.
STEP 3
To Next Page
Loading...