Trotec B 1 E User Manual

7 EN
Operating manual – humidifier B 1 E
Operation
• Avoid open doors and windows.
Operating elements
9a
9b
No. Designation
9a On/off switch/ rotary switch nebulizer intensity
9b Two-coloured LED (red/white)
Switching the device on
1. Make sure that the tank has been filled with drinking
water.
2. Make sure that the device is neither damp nor wet on the
outside. Otherwise wipe it dry.
3. Press the on/off switch(9a) for approx. 2s.
ð The LED(9b) is illuminated in white.
ð The device starts to humidify. Fine water mist leaves the
mist nozzle(10).
Setting the nebulizer intensity
The nebulizer intensity can be steplessly adjusted as desired.
1. Turn the rotary switch(9a) clockwise to increase the
nebulizer intensity or counter-clockwise to reduce the
nebulizer intensity.
Switching illumination on or off
When the device is in operation, the water tank can be
additionally illuminated by two blue LEDs located in the device
bottom.
1. Press the on/off switch(9a) to switch the illumination on or
off.
Shutdown
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
• Switch the device off by pressing the on/off switch(9a) for
approx. 2s.
• Hold onto the mains plug while pulling the power cable out
of the mains socket.
• Empty the water tank.
• Empty the lower part.
• Use a cloth to wipe all parts of the device dry.
• Clean the device according to the Maintenance chapter.
• Store the device according to the Storage chapter.
Available accessories
Warning
Only use accessories and additional equipment
specified in the operating manual.
Using insertion tools or accessories other than those
specified in the operating manual may cause a risk of
injury.
Designation Article number
SecoSan
®
Stick10 6.100.004.110

Trotec B 1 E Specifications

General

Brand	Trotec
Model	B 1 E
Category	Humidifier
Language	English