Trox Technik FKR-EU - Page 23

Attachments
TROXNETCOM FKR-EU
1
K4 – 1.1 – 2303/2017 – DE/en
FKR-EU with spring return actuator
and TROXNETCOM
– Fire dampers with a 24 V spring return actuator
and the modules described here as
attachments form a functional unit ready
for automatic operation
– The components are factory assembled
and wired
– It enables the integration of different
components (modules) into a network
regardless of the manufacturer
– The modules control actuators
and/or receive signals from sensors
Application
LON:
– LON indicates a standard local operating
network system with manufacturer- independent
communications
– Data transmission is based on
a uniform protocol
– International standards ensure
product compatibility
– Only the bus line and the supply voltage
remain to be connected by others
– WA1/B3-AD: To provide the control input signal
for up to two fire dampers
– LON-WA1/B2-AD: Connection box for
connecting the second fire damper with
24 V DC supply voltage to LON-WA1/B3
– WA1/B3-AD230: Connection box with integral
230/24 V power supply unit for the connection
of a second actuator-driven
24 V fire damper to LON-WA1/B3
AS-i:
– The AS interface is a global standard bus
system according to EN 50295
and IEC 62026- 2
– The module transmits the control signals
between the spring return actuator
and the controller and power unit
– This allows for controlling the actuator
and monitoring the actuator running time
during functional testing
– The voltage (24 V DC) for the module
and the actuator is supplied via
the two-wire AS-i flat cable
– Function display: operation, 4 inputs, 2 outputs
FKR-EU with spring return actuator
(explosion-proof) and TROXNETCOM
– The AS interface is a global standard bus
system according to EN 50295
and IEC 62026- 2
– It enables the integration of different
components (modules) into a network
regardless of the manufacturer
– The fire dampers with spring return actuator
ExMax/RedMax-15-BF-TR and module
AS- EM/C form a functional
unit ready for automatic operation.
– The modules control actuators
and/or receive signals from sensors
– The module is to be installed and wired outside
of the potentially explosive atmosphere
by others
Application
– The module transmits the control signals
between the spring return actuator
and the controller and power unit
– This allows for controlling the actuator
and monitoring the actuator running time
during functional testing
– The voltage (24 V DC) for the module
and the actuator is supplied via
the two-wire AS-i flat cable
– Function display: operation, 4 inputs, 2 outputs
Description
FKR-EU with
TROXNETCOM module
For detailed information
on TROXNETCOM see
Chapter 6
Order code detail
Description
ATEX certification
/ ZEX2
/ ZEX4

Order code detail
Attachments Order code
LON-WA1/B3 and BF(N)24-T-ST(-2) TR ZL09
WA1/B3-AD and BF(N)24-T-ST(-2) TR ZL10
WA1/B3-AD230 and BF(N)24-T-ST(-2) TR ZL11
AS-EM and BF(N)24-T-ST(-2) TR ZA07
Attachments Order code
AS-Interface module ExMax-15-BF TR ZEX2
AS-Interface module RedMax-15-BF TR ZEX4
/ ZL09
/ ZL10
/ ZL11
/ ZA07

TOC