To Next PageTo Next Page
Need help?Do you have a question about the Trox Technik AURASAFE mini TX-CTRL Series and is the answer not in the manual?
Guide for initial setup, controller operation, and system testing.
Details settings for time, parameters, smoke ventilation, and symbols.
Comprehensive list and description of alarm codes across languages.
Explains system topology, cable types, and requirements for installation.
Technical specifications and terminal descriptions for control units.
Details specific inputs and outputs for TX-CTRL1/2 controllers.
Details Modbus/BACnet protocols, IP settings, and general info.
Explains the LED indicators for the TX-CTRL-BM1 module.
Covers booster module specs, supply, and LED indicators.
Covers specs, fire/smoke detector inputs, and reset functions.
Details specs, PT1000 input, and alarm settings for temperature monitoring.
Details specs, inputs, outputs, and manual test function.
Covers specs, DIP switch addressing, and relay module functions.
Details specs, inputs, outputs, and manual test for smoke control dampers.
Covers specs, 24VDC supply, and relay output functions.
Details specs, addressing for damper/relay modes, and functions.
Covers specs, fixed address, and fault/alarm indications.
Explains card installation, modes, addressing, and teach-in.
Details physical wiring and LED status for the TX-EXP1 expansion card.
Detailed mapping of Modbus registers and commands.
Explanation of Modbus commands and their functions.
Mapping of BACnet objects and CTRL status bits.
General| Product Type | Fire and Smoke Damper |
|---|---|
| Fire Resistance | Yes |
| Fire Resistance Standard | EN 1366-2 |
| Voltage | 24 V AC/DC |
| Position Feedback | Yes |
| Actuation | Motorised |
| Housing Material | Galvanized steel |
| Fire Resistance Rating | EI 90 |
| Standards | EN 1366-2, EN 13501-3 |
| Casing Leakage | EN 1751 |
| Blade Leakage | EN 1751 |
