Trox Technik AURASAFE mini TX-CTRL Series - BACnet Communication Appendices; BACnet Memory Mapping

35
NO/DK/GB
Object Name Description BUS Dipswitch
Device 0:
Binary_input:1 Module-0 Alivebit-1 Active if a device is connected on the BUS,
otherwise inactive.
0
Binary_input:2 Module-0 Alivebit-2 Active if a device is connected on the BUS,
otherwise inactive.
Binary_input:257 Module-0 Input-1 See page 37 and 38 for module specic
description.
Binary_input:258 Module-0 Input-2 See page 37 and 38 for module specic
description.
Binary_input:513 Module-0 Output-1 See page 37 and 38 for module specic
description.
Binary_input:514 Module-0 Output-2 See page 37 and 38 for module specic
description.
Device 1:
Binary_input:3 Module-1 Alivebit-1 Active if a device is connected on the BUS,
otherwise inactive.
1
Binary_input:4 Module-1 Alivebit-2 Active if a device is connected on the BUS,
otherwise inactive.
Binary_input:259 Module-1 Input-1 See page 37 and 38 for module specic
description.
Binary_input:260 Module-1 Input-2 See page 37 and 38 for module specic
description.
Binary_input:515 Module-1 Output-1 See page 37 and 38 for module specic
description.
Binary_input:516 Module-1 Output-2 See page 37 and 38 for module specic
description.
Device X:
Binary_input:(X×2)+1 Module-X Alivebit-1 Active if a device is connected on the BUS,
otherwise inactive.
2
Binary_input: (X×2)+2 Module-X Alivebit-2 Active if a device is connected on the BUS,
otherwise inactive.
Binary_input: (X×2)+257 Module-X Input-1 See page 37 and 38 for module specic
description.
Binary_input: (X×2)+258 Module-X Input-2 See page 37 and 38 for module specic
description.
Binary_input: (X×2)+513 Module-X Output-1 See page 37 and 38 for module specic
description.
Binary_input: (X×2)+514 Module-X Output-2 See page 37 and 38 for module specic
description.
Device X
+
1:
X
+
1
Module mapping
APPENDIX C: BACnet
memory mapping