Troy-Bilt 25B-554E011 User Manual

IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Read and understand all instruction, warning, and danger labels.
Need Help? Call 1-888-TO-HELP-U (1-888-864-3578)
Lea el manual de operación anexo sobre ensamblaje e inicio.
778-11111A
25B-554E011
25B-554E711
1
2
Tighten rope guide wing nut.
4
3
Starter
Rope
© 2006
Blade control handle
Unfold handle into operating position.
Secure handle by tightening hand knobs.
Hold blade control handle against upper handle.
Slowly slip starter rope into rope guide.
Hand Knobs
1
2
3

Troy-Bilt 25B-554E011 Specifications

General

Brand	Troy-Bilt
Model	25B-554E011
Category	Edger
Language	English

Summary

Fast Start Guide

Unfold Handle

Unfold the handle into the correct operating position for use.

Secure Handle

Tighten the hand knobs to secure the handle in place.

Prepare Starter Rope

Hold blade control handle and guide starter rope into the rope guide.

Tighten Rope Guide

Secure the rope guide by tightening the wing nut.

Fuel and Oil Preparation

Fill Fuel Tank

Fill the fuel tank with gasoline, leaving 1/2 inch of space at the top.

Fill Engine Oil

Add the entire contents of the provided oil bottle to the engine.

Prime Engine

Press the primer bulb five times to prepare the engine for starting.

Set Depth and Engage Handle

Set the blade depth and hold the blade control handle.

Start Engine

Pull the starter rope with a strong stroke to start the engine.