Need help?Do you have a question about the Troy-Bilt GTX 20 and is the answer not in the manual?
General| Transmission | Hydrostatic |
|---|---|
| Fuel Capacity | 3 gallons |
| Number of Blades | 2 |
| Turning Radius | 18 inches |
| Horsepower | 20 HP |
| Cutting Height | 1.5 - 4 inches |
| Deck Material | Steel |
Key safety alert symbol and general safety precautions for operating the unit.
Checks and preparations to perform before starting the tractor and its attachments.
Precautions and safe practices for handling gasoline and flammable fuels.
Instructions for safe operation of the tractor, including starting and general use.
Safety precautions and warnings related to children around the tractor.
Safety guidelines for operating the tractor on slopes to prevent tip-overs.
Procedures for safely stopping the engine and the tractor.
General safety precautions to follow when performing maintenance.
Safety precautions related to the tractor's engine.
Safety precautions and warnings when working with the tractor's battery.
Detailed technical specifications for the tractor models.
Procedure for checking and filling the engine oil to the correct level.
Instructions for safely filling the fuel tank with the correct type of gasoline.
Specifies the correct tire pressure for the front and rear tires.
Step-by-step instructions for safely starting the tractor engine.
Procedure for safely shutting down and stopping the tractor engine.
Explanation of the tractor's safety interlock system and its function.
How to engage and disengage power to the tractor's attachments or PTO.
How to operate the hydraulic lift for raising and lowering attachments.
Operation of auxiliary hydraulic controls for specific tractor models.
How to operate the hydrostatic transmission for optimal performance and speed control.
How to use the travel pedal for forward, reverse, and speed control.
Instructions for draining and refilling the engine oil at recommended intervals.
Procedures for checking and changing the hydrostatic transmission fluid.
Procedure to adjust the hydrostatic system if the tractor creeps in neutral.
Chart detailing lubrication points, frequency, type, and amount required for the tractor.
Guide to diagnosing and solving common problems encountered with the tractor.
To Next Page
