Troy-Bilt TB 1942 hydro - User Manual

Troy-Bilt TB 1942 hydro

36 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

TROY-BILT LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019

Printed In USA

OperatOr’s Manual

Safe Operation Practices • Set-Up • Operation • Maintenance • Service • Troubleshooting • Warranty

WARNING

READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL

BEFORE ATTEMPTING TO OPERATE THIS MACHINE.

FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.

TB 1942/2246/2350/2454 Hydro

Form No. 769-10373B

(February 18, 2015)

Table of Contents

Questions and Answers

D
Denise HudsonAug 10, 2025
How to fix uneven cut with my Troy-Bilt Mower?
- K
  Kimberly KruegerAug 11, 2025
  An uneven cut with your Troy-Bilt Mower may occur if the deck isn't leveled correctly, so perform a side-to-side deck adjustment. It could also be due to a dull or damaged blade, which means you should sharpen or replace the blade. Finally, check and correct the tire pressure in all four tires, as uneven tire pressure can also cause this issue.
C
Claudia EricksonAug 25, 2025
Why is my Troy-Bilt TB 1942 hydro vibrating so much?
- P
  patrickchristensenAug 26, 2025
  Excessive vibration in your Troy-Bilt Mower can be due to a loose cutting blade. Ensure the blade and spindle are tightened properly. Alternatively, the blade may be damaged, unbalanced, or bent, in which case you should replace it.

Troy-Bilt TB 1942 hydro Specifications

General

Brand	Troy-Bilt
Model	TB 1942 hydro
Category	Mower
Language	English