Need help?Do you have a question about the Tru-Turf RS48-11C and is the answer not in the manual?
Lists all parts included with the machine for initial setup and assembly.
Essential checks to perform before starting the roller to ensure safe and proper function.
Step-by-step guide for operating the roller on golf greens.
Key tips and reminders for efficient and safe roller operation.
Specific instructions for engaging and using the spiker function of the roller.
Details on how to engage and disengage the emergency and park brake system.
Procedures for maintaining the Eaton 11 transmission, including oil changes and filter replacement.
Guidelines for properly storing the roller to prevent damage and corrosion.
Instructions for maintaining the drive chain system, including lubrication and tension.
Details on lubricating various parts of the roller, including the drive chain.
Procedures for checking, servicing, and replacing bearings for the smoothing rollers.
Instructions on when and how to change the oil for the machine.
Diagnosing and resolving issues when the roller fails to move or move correctly.
Troubleshooting steps for steering problems with the golf greens roller.
Identifying causes and solutions for excessive vibration during roller operation.
Steps to take if the smoothing rollers become seized or do not rotate.
Troubleshooting why the rubber drive roller is not rotating.
Lists all parts included with the machine for initial setup and assembly.
Essential checks to perform before starting the roller to ensure safe and proper function.
Step-by-step guide for operating the roller on golf greens.
Key tips and reminders for efficient and safe roller operation.
Specific instructions for engaging and using the spiker function of the roller.
Details on how to engage and disengage the emergency and park brake system.
Procedures for maintaining the Eaton 11 transmission, including oil changes and filter replacement.
Guidelines for properly storing the roller to prevent damage and corrosion.
Instructions for maintaining the drive chain system, including lubrication and tension.
Details on lubricating various parts of the roller, including the drive chain.
Procedures for checking, servicing, and replacing bearings for the smoothing rollers.
Instructions on when and how to change the oil for the machine.
Diagnosing and resolving issues when the roller fails to move or move correctly.
Troubleshooting steps for steering problems with the golf greens roller.
Identifying causes and solutions for excessive vibration during roller operation.
Steps to take if the smoothing rollers become seized or do not rotate.
Troubleshooting why the rubber drive roller is not rotating.
General| Model | RS48-11C |
|---|---|
| Drive | Rear Wheel Drive |
| Battery Voltage | 48V |
| Seating Capacity | 2 |
| Tire Size | 18 x 8.5-8 |
| Charger Output | 48V DC |
| Power Source | Electric |
| Payload Capacity | 800 lbs |
| Charger Type | On-Board |
| Standard Features | Headlights, Taillights, Horn |
To Next Page
