8
HOW TO USE
How to Heat & Froth Milk:
1. Place Milk Frothing Whisk onto Attachment Shaft- it is held in place magnetically.
2. Pour fresh, cold milk into the Pitcher; do not ll above lower MAX Fill Line, which is 120ml.
3. Press Lid securely into place, then place Pitcher onto Power Base. Plug into outlet.
4. Press Power Button once to start the heating & frothing cycle. The Power Button will illuminate the word HOT in red, which indicates the
appliance is in operation. The Frother will turn o automatically when the heating/frothing cycle is complete, which takes approximately two
minutes and thirty seconds.
5. The process can be interrupted at any time by pressing the Power Button again.
6. Take Pitcher o Power Base. Remove Lid and pour. Unplug when not in use.
How to Froth Cold Milk:
1. Place Milk Frothing Whisk onto Attachment Shaft- it is held in place magnetically.
2. Pour fresh, cold milk into the Pitcher; do not ll above the lower MAX Fill Line, which is 120 ml.
3. Press Lid securely into place, then place Pitcher onto Power Base. Plug into outlet.
4. Press Power Button twice to start frothing without the heating element. Power Button will illuminate the word COOL in blue. Frother will turn
o automatically when frothing is complete, which takes approximately two minutes and thirty seconds.
5. The process can be interrupted at any time by pressing the Power Button again.
6. Take Pitcher o Power Base. Remove Lid and pour. Unplug when not in use.
How to Warm Milk (without frothing):
1. Remove Milk Frothing Whisk from the Attachment Shaft- it is not used in the warming only process.
2. Pour fresh, cold milk into Pitcher; do not ll above the higher MAX Fill Line, which is 300ml.
3. Press Lid securely into place, then place Pitcher onto Power Base. Plug into outlet.
4. Press Power Button once to start the heating cycle. The Power Button will illuminate the word HOT in red, which indicates the appliance is
in operation. The Frother will turn o automatically when the heating cycle is complete, which takes approximately two minutes and thirty
seconds.
5. The process can be interrupted at any time by pressing the Power Button again.
6. Take Pitcher o Power Base. Remove Lid and pour. Unplug when not in use.
To Next Page
Loading...